VIBRO ISOLATOR VRSIR
VRSIR Restrained Spring isolators are designed to deliver high-deflection vibration isolation while incorporating structural containment features that prevent excessive movement under dynamic or seismic conditions. These units utilize large-diameter, laterally stable steel springs housed within a rigid frame that limits vertical and horizontal displacement, ensuring safe and predictable performance in demanding environments.
Each spring assembly is integrated into a heavy-duty upper load plate with a built-in leveling mechanism, allowing for precise load distribution and simplified installation. The restrained design ensures that the spring remains securely seated throughout its operating range, even under transient or overload conditions.
VIBRO LAG – ACOUSTIC LAGGING
VIBRO LAYMENT impact resistant acoustic underlays are high quality products suitable for every floor covering. They provide high impact sound insulation values, are very durable and low in emissions. Acoustic Underlay is a permanently elastic material and can be supplied in rolls, sheets or molded parts. Acoustic Underlay is suitable for all applications which require attenuation of impact sound and vibration, durability and resistance to mechanical loads. Acoustic Underlay can be used for a wide variety of sports surfaces, floor covering, impact protection, sheets and tiles for building protection materials for vibration control and anti-slip mats for securing loads. VIBRO LAYMENT acoustic underlay products have an excellent ratio between impact thickness and impact sound improvement with negligible creep behavior, even under high static or dynamic continuous loads. These layers are installed before the floor covering is added, whether it’s carpet, tiles, floorboards or a floating floor. The underlay is rolled out to the subfloor (usually either a wooden frame or concrete slab) all the way to the edge. Our Underlay is a flat, resilient, reduced sound transmission mat made from 94% recycled rubber content, used directly under hard surface floor finishes and over concrete and wood construction.
VIBRO LAYMENT ACOUSTIC UNDELAY
VIBRO LAYMENT impact resistant acoustic underlays are high quality products suitable for every floor covering. They provide high impact sound insulation values, are very durable and low in emissions. Acoustic Underlay is a permanently elastic material and can be supplied in rolls, sheets or molded parts. Acoustic Underlay is suitable for all applications which require attenuation of impact sound and vibration, durability and resistance to mechanical loads. Acoustic Underlay can be used for a wide variety of sports surfaces, floor covering, impact protection, sheets and tiles for building protection materials for vibration control and anti-slip mats for securing loads. VIBRO LAYMENT acoustic underlay products have an excellent ratio between impact thickness and impact sound improvement with negligible creep behavior, even under high static or dynamic continuous loads. These layers are installed before the floor covering is added, whether it’s carpet, tiles, floorboards or a floating floor. The underlay is rolled out to the subfloor (usually either a wooden frame or concrete slab) all the way to the edge. Our Underlay is a flat, resilient, reduced sound transmission mat made from 94% recycled rubber content, used directly under hard surface floor finishes and over concrete and wood construction.
VIBRO MOUNT E NEOPRENE ISOLATORS
Vibro Mount Model VRMT neoprene isolators are precision‑moulded, one‑piece vibration control mounts incorporating encapsulated steel inserts for enhanced durability. Each unit is colour‑coded for quick identification of load capacity and features non‑slip ribbing on the underside to ensure secure placement on supporting surfaces.
The isolators are engineered with:
- Twin bolt‑down holes on the base plate for secure anchorage.
- Tapped steel top plate for direct attachment to supported equipment.
VIBRO MOUNT FLOATING FLOOR NEOPRENE MOUNT
Floor isolation systems are incorporated into building design to minimize floor impact noise and airborne sound transmissions. Additional designed floor slab is supported by resilient mounts installed on the structural main slab. The design of an effective isolation system is dependent on several factors including:
• Required Noise criteria to achieve.
• Mass & Stiffness of the structural slab.
• Isolation Mounts natural frequency and damping characteristics.
• Space or Air gap to be created.
• Design of the floated slab.
• Control of Sound flanking paths.
Creating air gap between the main and floated floors while decoupling the two floors with the appropriate resilient mount effectively reduce noise transmission. Airborne and impact noise transmissions are greatly reduced between the room incorporating the floating floor system and other floors of the building. VIBRO MOUNT floating floor systems offers the largest variety of isolation mounts with natural frequency as less than 10 Hz to fit specific applications.
VIBRO PADS VRCP
VRCP Pads are engineered vibration control elements composed of elastomeric layers bonded with cork inserts, forming a multi-layered structure that delivers reliable performance in light-to-medium duty applications. The ribbed surface geometry enhances frictional stability, making these pads suitable for installations requiring non-bolted support.
Constructed using high-grade elastomer and natural cork, the VRCP series is available in single or composite-layer formats. The cork interlayer acts as a natural damping medium, improving load distribution and vibration attenuation. With hardness options ranging from 40 to 80 Shore A, these pads are designed to accommodate varying load intensities while preserving material resilience. The elastomer is formulated to resist degradation from oils and moisture, ensuring the pad remains within its elastic operating range throughout its service life.
Deflection capabilities span from 2 mm to 5 mm, supporting effective isolation across a range of equipment types. VRCP Pads are supplied in modular dimensions of 2″, 3″, 4″, 6″, and 9″, along with full-format 18″ (457 mm) square sheets that can be tailored on-site to meet specific installation needs. Their design is particularly suited for mitigating airborne noise, mechanical shock, and high-frequency vibration in non-critical zones or grade-level installations.
Recommended for use in scenarios where mechanical anchoring is not preferred, VRCP Pads are well-suited for HVAC units, rotating machinery, pumps, chillers, generators, and workshop equipment where vibration control is required without complex mounting provisions.
VIBRO PADS VRNP
VRNP Pads are versatile rubber pad featuring a finely ribbed pattern on both sides. This lightweight mounting pad provides excellent grip and effective vibration isolation thanks to its solid ribbed design.
Manufactured from high-quality elastomer, VRNP pad is available in a double-ribbed configuration. The pads come in 40 – 80 durometer ratings and are engineered to handle maximum loads. The elastomer is resistant to oil and water, designed to remain within the strain limits of the isolator, ensuring durability and long service life.
VRNP Pads are offered with rated deflections between 2 mm – 5 mm and are available in sizes of 2″, 3″, 4″, 6″, or 9″, as well as full 18″ (457 mm) square sheets that can be cut or drilled to suit field requirements. They are ideal for isolating noise, shock, and high-frequency vibration generated by mechanical, industrial, or process equipment installed at grade level or in other non-critical areas.
Best suited for situations where bolting is not desirable and vibration is minor or non-critical, VRNP Pad is recommended for use with HVAC systems, motors, pumps, generators, air conditioning units, chillers, and various machine shop equipment.
VIBRO PADS VRSP
VRSP Pads are high-performance elastomeric mounting pads designed with a finely double-ribbed profile, available in single or multiple layers interleaved with steel shims. This robust yet lightweight configuration ensures superior grip and effective vibration isolation, making it ideal for a wide range of applications.
Manufactured from premium-grade elastomer, the VRSP Pads are offered in configurations featuring double-ribbed surfaces with integrated steel shims for enhanced load distribution. Available in durometer ratings from 40 to 80 Shore A, these pads are engineered to support substantial loads while maintaining structural integrity. The elastomer compound is resistant to oil and water ingress and is formulated to operate within the elastic limits of the isolator, ensuring long-term durability and consistent performance.
Standard deflection ratings range from 2 mm to 5 mm. VRSP Pads are available in standard sizes of 2″, 3″, 4″, 6″, and 9″, as well as full 18″ (457 mm) square sheets that can be easily cut or drilled on-site to meet specific installation requirements. They are particularly effective in attenuating noise, shock, and high-frequency vibration from mechanical, industrial, or process equipment installed at grade level or in non-critical environments.
Ideal for applications where bolting is impractical and vibration levels are moderate or non-critical, VRSP Pads are recommended for use with HVAC systems, pumps, motors, generators, chillers, air conditioning units, and general machine shop equipment.
VIBRO PADS VRWP
VRWP Isolation Pads are precision-moulded vibration control elements fabricated from durable neoprene elastomer, offering consistent performance in moderate-load applications. With a nominal hardness of 50 Shore A, each pad is engineered to support compressive loads up to 60 psi 4.0 kg/cm² and deliver static deflection of approximately 20% of its original thickness equating to 3.8 mm under rated conditions.
For enhanced deflection, multiple layers may be stacked using interleaved steel shims, allowing tailored isolation performance based on site requirements. The neoprene compound is formulated for long-term resilience, exhibiting strong resistance to oil, water, and environmental degradation, while remaining within the safe stress limits of the material.
Pads are supplied in 457 mm x 457 mm x 19 mm sheets, pre-scored into 51 mm x 51 mm segments for easy field customization. Designed to function in shear, VRWP pads effectively dampen airborne noise, mechanical shock, and high-frequency vibration from equipment installed on grade or structural slabs in non-critical zones.
Recommended for use with machinery operating at speeds of 3600 rpm or higher, these pads should not be subjected to loads exceeding 4.0 kg/cm². Under impact or shock conditions, the allowable load should be reduced by 50% to maintain performance integrity.
VIBRO PANEL MUSHROOM
The distinctive mushroom-head profile enhances the surface area for sound absorption, significantly improving its ability to capture and dissipate sound waves. This results in reduced noise interference and greater clarity in acoustic performance. The material is especially well-suited for environments requiring superior sound control, including home theaters, music rooms, and recording studios.
VIBRO PANEL PYRAMIDS
Pyramid acoustic foam is a widely favoured sound-absorbing material, known for its visually appealing design and outstanding acoustic performance. Its distinctive four-sided conical structure not only enhances absorption but also introduces a degree of sound diffusion, contributing to a more dynamic and vibrant acoustic environment.
