Click to enlarge
VIBRO BARRIER ACOUSTIC BARRIER
VIBRO BARRIER ACOUSTIC BARRIER
Back to products
VIBRO LAYMENT ACOUSTIC UNDELAY
VIBRO LAYMENT ACOUSTIC UNDELAY

VIBRO CLIP RESILIENT SOUND ISOLATION CLIP

VIBRO CLIP Resilient Sound Isolation Clip provides a professional level of acoustic separation of walls and ceilings. This engineered clip forms a decoupled assembly that does not allow sound vibration to pass through structural connections, which significantly enhances sound transmission class ratings in residential and commercial areas.

The clip system operates through the isolation of drywall and structural framing in a mechanical manner, breaking the direct contact that enables the transmission of noise between rooms. VIBRO CLIP, when properly installed, will convert ordinary construction into high performance acoustic barriers capable of stopping airborne sound as well as structure borne vibration.

Installation is easy and economical as compared to other forms of isolation. The clips are directly connected to the existing studs or joists, and they support strong channels that carry finishing materials. This floating assembly is independent of the main structure and it absorbs the vibration energy before it can pass through walls or ceilings.

VIBRO CLIP is the best in the management of impact noise, mechanical vibration and overall sound transmission between the adjacent spaces. The system is applicable in home theaters, recording studios, multi-family housing, offices, and any other application where high acoustic isolation is needed. Its strong construction means that it will not deteriorate with time and the streamlined design will fit perfectly into the normal construction programs. To builders and property owners who are interested in a soundproofing solution that can be relied upon to provide a quantifiable acoustic solution, VIBRO CLIP offers a proven performance at reasonable prices.

Category:
Description

Description

VIBRO isolation clips are engineered with a natural neoprene grommet pad integrated with a threaded shaft, which connects to a central electroplated zinc mild steel bushing. The center bushing measures approximately 20 mm in length, featuring a 10 mm shaft section and a 21.5 mm end clip. The neoprene isolator itself has dimensions of 1 ½″ x ½″, providing durability and resilience for effective vibration control.

Designed for versatility, VIBRO CLIPs can be used in wood, steel, CMU (concrete masonry unit), or concrete wall and ceiling systems. Their primary function is to decouple gypsum board from the structural framing, thereby significantly improving acoustic isolation.

Each VIBRO CLIP has an acoustical design load capacity of 36 lbs per isolator, allowing it to support up to two layers of ⅝″ gypsum board when installed at maximum spacing of 24″ x 48″ on center. By fastening directly to the structure or framing, VIBRO CLIP minimize the transfer of sound and vibration into adjoining spaces, resulting in higher STC (Sound Transmission Class) and IIC (Impact Insulation Class) ratings for the overall assembly.
diesel engines.

  • VIBRO CLIP prevent buckling or overturning of tall or long walls.
  • Our general recommendation is spacing on four – foot centers both horizontally and vertically.
  • The maximum axial restraint rating is approximately 33% of the maximum assigned wall weight and extremely conservative.
  • Vertical resistance information is provided for checking embedment requirements in walls and shear or pullout forces on both ends of the VIBRO CLIP

The combination isolation wall clip assembly (VIBRO CLIP) Tolerances in dimensions are as per international standards.

  1. Rubber Isolator:
  • Natural organic rubber compounds.
  • Moulded to isolate ferrule from clip.
  • Minimum of 12 micro-vibration controlling pedestals at point of contact with framing member.
  • Manufactured to ASTM D 2000, M2 AA 510 A13, which includes:
  1. Clip: Galvanized or aluminium-zinc coated steel, 18 gauge.
  2. Intended use: For use with wall and ceiling construction assemblies to prevent sound and vibration transmission to improve STC and IIC ratings
  3. Ferrule: Zinc-electroplated steel.
  4. Projection: 1-5/8” from supporting structure, when 7/8” drywall furring channels are used.
  5. Substitutions: Not permitted.

Dimensions: 76mm x 32mm x 41mm
Maximum Load: 16 kg (36 lb) per each Isolation Clip
Maximum Spacing: 48” o.c.
Temperature Stability: -35°c to +100°c

Treated Structure: Impact Sound Pressure Level according to ISO 717-2Receiving Room Volume: 20m³

Original Wall Build-Up:15 mm Acoustic Plasterboard (12.5 kg/m²)
Stud Wall 95 mm
75 mm RW3 Rockwool (4.5 kg/m²)
15 mm Acoustic Plasterboard (12.5 kg/m²)
Additional Build-Up: MuteClip and MuteClip Channel

Acoustic Performance: Original Wall Build-Up: Rw (C;Ctr) = 45 dB
(-2; -7)Additional Build-Up: Rw (C;Ctr) = 54
dB (-4; -11)
Wall: DnT,w + Ctr = 70 dB
Ceiling: DnT,w + Ctr = 54 dB
L’nT,w = 53 db
Performance will vary with different foor make-up. Rating in accordance to ISO 717-2

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “VIBRO CLIP RESILIENT SOUND ISOLATION CLIP”

Your email address will not be published. Required fields are marked *